GNEE jista' jipprovdi l-formola
C68700 Folja tal-metall tar-ram
Solidu C68700 Ram tad-Dinja Virga
Pajp tar-ram C68700 flessibbli
C68700 Cable Flessibbli tar-Ram
C44300 C68700 Tubu tar-ram tal-liga tar-ram ASTM B111
| Ram jew Liga tar-Ram UNS NO. | Deskrizzjoni |
| C44300 | Metalli tal-Ammiraljat, B, C, u D |
| C68700 | Aluminju Ram, B |
| C70600 | 90-10 Ram-Nikel |
| C71500 | 70-30 Ram-Nikil |
Standard:ASTM B111 / B111M.
Deskrizzjoni Isem:Tubi tar-ram ASTM B111, tubi tar-ram C44300, tubi tar-ram tal-Ammiraljat C44300, pajpijiet tar-ram tal-Ammiraljat C44300, tubi tar-ram C68700, tubi tar-ram tal-aluminju C68700, pajpijiet tar-ram tal-aluminju C68700, pajp tar-ram C7060, C70600, tar-ram C70600 C70400 tubi tar-ram, C70400 Tubi u pajpijiet tar-ram, C70400 Ram-Tubi u pajpijiet tan-nikil. C71500 tubi tar-ram, C71500 Tubi u pajpijiet tar-ram, C71500 Ram-Tubi u pajpijiet tan-nikil, C71640 tubi tar-ram, C71640 Tubi u pajpijiet tar-ram, C71640 Ram-tubi u pajpijiet tan-nikil.
Daqs:6mm sa 100 mm.
Ħxuna tal-ħajt:0.5 sa 25mm.
Forma:Round.
Tul:Tul każwali wieħed/ Tul każwali doppju jew bħala talba attwali tal-klijent.
Grad: C44300, C68700, C70400, C70600, C71500, C71640.
Kompożizzjoni Kimika:
| Denominazzjoni | Kompożizzjoni Kimika % | ||||||||
| Cu | Sn | Al | Kif | Ni | Fe | Mn | Pb max. | Zn | |
| C44300 | 70.0-73.0 | 0.9-1.2 | – | 0.02-0.06 | – | 0.06 max | – | 0.07 | Rem |
| C68700 | 76.0-79.0 | – | 1.8-2.5 | 0.02-0.06 | – | 0.06 max | – | 0.07 | Rem |
| C70400 | Rem | – | – | – | 4.8-6.2 | 1.3-1.7 | 0.3-0.8 | 0.05 | 1.0max |
| C70600 | Rem | – | – | – | 9.0-11.0 | 1.0-1.8 | 1.0max | 0.05 | 1.0max |
| C71500 | Rem | – | – | – | 29.0-33.0 | 0.4-1.0 | 1.0max | 0.05 | 1.0max |
| C71640 | Rem | – | – | – | 29.0-32.0 | 1.7-2.3 | 1.5-2.5 | 0.05 | 1.0max |
Prodotti pprovduti minn GNEE
| Kategorija tal-Prodott | Standard & Materjal | Formoli Disponibbli | Medda ta 'ħxuna / Dijametru | Wisa' / Medda OD | Tul / Forma | Temper / Stat | Finish tal-wiċċ |
|---|---|---|---|---|---|---|---|
| Folja tar-ram u Pjanċa | ASTM B152, B187 Ram Pur (C11000) Bronż Fosforu, Ram |
• Kolja • Folja • Pjanċa |
Folja:0.3 mm - 10.0 mm Pjanċa:10.0 mm - 100 mm |
100 mm - 2500 mm | Coil: Custom Folja/Pjanċa: 1000mm - 6000mm jew Custom |
• O (Ttemprat Artab) • H02 (Nofs-Iebsa) • H04 (Iebsa) • H08 (Sħiħ-Iebsa) |
• Mitħna (Barre) • Lebsin • Brushed • Miksija |
| Virga tar-ram & Bar | ASTM B133, B187 Ram Pur, Ram Tellurium Ram, Bronż |
• Round Rod • Pjazza Bar • Bar eżagonali • Flat Bar |
Dija virga.:2.0 mm - 300 mm Flat Bar Thk.:3 mm - 50 mm |
Wisa' tal-Bar ċatt:10 mm - 400 mm | Dritt: 1000mm - 6000mm Coil (għal dija żgħir.) |
• Ittemprat (Artab) • Nofs-Iebsa • Iebsa • Kif Drawn |
• Miġbud (Lixx) • Imdawwar (Imqaxxar) • Art (Illustrat) |
| Wajer tar-ram | ASTM B1, B3 Ram Bare, Ram tal-bott |
• Wajer Bare • Wajer tal-landa • Stranded Wajer • Wajer Braided |
Wajer Solidu:0.05 mm - 10.0 mm Stranded:Custom (eż., 7/0.2mm) |
- | Coil, Rukkell, Rukkell Piż: Custom (eż., 5kg, 25kg) |
• Artab (Ttemprat) • Hard Drawn • Medju-Iebsa |
• Bright Bare • Electrotinned • Ossidizzat-Reżistenti |
| Tubu tar-ram u Pajp | ASTM B75, B88 Bla saldatura, iwweldjati Ram DHP (C12200) |
• Tubu Straight • Coiled Tube • Tubu Kapillari • Tubu Kwadru |
OD:3 mm - 300 mm Ħajt Thk.:0.5 mm - 10.0 mm |
- | Dritt: 1000mm - 8000mm Coil: Tul tad-dwana |
• Ittemprat (Artab, Liwi) • Hard Drawn (Dritta) |
• Bare (Nadif) • illustrat • Kappa tal-plastik |
| Folja tar-ram | ASTM B370 Irrumblat Ittemprat (RA) Elettrodepożitat (ED) |
• Roll / Coil • Strixxa |
Ħxuna:0.01 mm - 0.50 mm (10 µm - 500 µm) |
10 mm - 1300 mm | Coil: Tul tad-dwana | • Kif Irrumblat (Iebsa) • Ittemprat (Artab, Duttili) • Laminat |
• Standard (Naħa waħda Bright) • Double Side Bright • Ittrattat (għal PCB) |
